Home : FAQ's : SmartCom3 Service Reset
SmartCom3 Service Reset

Service Reset 

Settings shown cover SmartCom 3 variants, certain settings only refer to those as indicated.

In order to access the engineer functions press and hold the button and at the same time, press the button once. The display changes to:.


Typical engineer display

Release the button.

Continue pressing the button until the following is displayed.


figure on the bottom row displays the number of burner hours since last service reset.

Press the button whilst the log is displayed to reset to zero (0)



Press the button again to confirm zero value.

Press the button twice until the following is displayed.


Displays hours saved during ON periods but heating is not called for.

Press the button whilst the log is displayed to reset to zero (0)



Press the button again to confirm zero value.

Press the button once until the following is displayed.


Displays hours saved during OFF periods but heating is required.

Press the button whilst the log is displayed to reset to zero (0)



Press the button again to confirm zero value.

Press the  button to return to main display.

Related Articles
No Related Articles Available.

Article Attachments
SmartCom3 Log Reset.pdf

Related External Links
No Related Links Available.
Help us improve this article...
What did you think of this article?

poor 
1
2
3
4
5
6
7
8
9
10

 excellent
Tell us why you rated the content this way. (optional)
 
Approved Comments...
No user comments available for this article.
Last Modified on 05/04/2013.
Print Article
Email Article